Network Warning: Spammers are constantly finding ways to out-fox spam filters. It is a constant battle. Our ant...

Make sure your computer is directly connected to your modem with an ethernet cable (the yellow cord that came with the modem)

Open your internet browser and clear the address bar at the top. Type the modem’s IP address, 192.168.1.254 as shown below, then press Enter on your keyboard

A window requesting a login will appear. Type the word admin (all lowercase) in both the username and password fields, and click OK or Login

Follow the first three steps from the top of this page. Once you have logged into the modem, click on Wireless on the left

Check the box next to Enable, then click Apply at the bottom. Your wireless network name will appear in the SSID field as ‘gmavt_wireless_xxxx’. You can change this to something else if you would like, then click Apply at the bottom again

Click on Security on the left

The wireless password is masked, but you can display it by clicking the link that says Click here to display and the password will show up in a separate window. You can change it by clearing the passphrase field and entering a new one.

**Please note that the password must be at least eight characters long, and it is case sensitive**

When you are done making changes, click Apply at the bottom. After the page refreshes, close the browser window.